ISO 9001:2000 CERTIFIED

    » CUSTOM MANUFACTURING
 

SPLIT DRIVE ANCHORS

The Split Drive Anchor is a one piece carbon steel for light-duty anchoring to all masonry. Split Drives are available in round head or flat head styles.




ROUND HEAD SIZES AVAILABLE
Item Number Qty Size
14114SR 100 1/4 X 1 1/4
14112SR 100 1/4 X 1 1/2
14200SR 100 1/4 X 2
14212SR 100 1/4 X 2 1/2
FLAT HEAD SIZES AVAILABLE
Item Number Qty Size
14112SF 100 1/4 X 1 1/2
14200SF 100 1/4 X 2
14212SF 100 1/4 X 2 1/2
14300SF 100 1/4 X 3
14312SF 100 1/4 X 3 1/2
14400SF 100 1/4 X 4


TEST PERFORMANCE DATA
Diameter Embedment Pull-Out
1/4" 1 1/8" 2000 lbs.
All tests conducted in 3700 psi concrete. GSA Spec. FF-S-325, Group IV
A safety factor of 4:1, or 25% of ultimate, should be used. Critical applications (vibratory loads, overhead installations, etc.) may require a safety factor of as much as 10:1 or more.





Installation Procedure


What advantages are there?
Easy to install! A drill and hammer are the only tools needed to install split drives. They also offer a relatively high pull-out strength at a low cost.

• Works in poured concrete, concrete block, brick and stone
• Drill same hole diameter as the anchor diameter
• Zinc plated for corrosion resistance
• Meets ASTM B-633
• Available in open stock boxes or bulk

Where do I use Split Drive Anchors?

• Thresholds
• Handles & Guards Rails
• Window Frames
• Signs
• Trim Edges
• Light Fixtures
• Wood To Concrete
• Sheet Metal To Concrete
• Vent Covers
• Mail Boxes
 
 
Diversified Fastening Systems, Inc
501 Richings St.
Charles City, Iowa 50616
1.800.833.6417