ISO 9001:2008 CERTIFIED

    » CONCRETE ANCHORS & FASTENING SYSTEMS
 

ROTARY TRANSFER MACHINES

DFS/USA is proud to offer our customers various parts produced from one of our Hydromat Rotary Transfer Machines.

The Hydromats consist of a modular system with up to 12 horizontal and 6 vertical tool-spindle units. This includes an "inverting" unit which removes the workpiece from the collet, turns it end-for -end and places it precisely back into the same collet. This gives us the capability to machine the backside of any part.

Our Hydromats continuously perform various types of machining operations such as drilling, cross drilling, boring, turning, milling, external and internal recessing, threading, tapping and broaching.

Being hydraulically controlled, the Hydromats maintain infinitely variable feeds for each tool spindle.

A Hydromat part is more cost effective, eliminating the need for outside secondary operations.

 

 

 


HYDROMAT



















"An example of what our Hydromats can manufacture is the patented #8 Con-Sert Tool Hex Driver."

  1. The piece is cut to length
  2. The thread OD is turned, center drilled and chamfered
  3. Drills (2) operations for drill depth
  4. Cuts recess head relief
  5. Threads 7/16-20 SAE
  6. The part is inverted
  7. Turns the body OD and Center Drills
  8. Drills a broach with a .250 hex
  9. Chamfer body OD
  10. kickout finished piece

 
 
Diversified Fastening Systems, Inc
501 Richings St.
Charles City, Iowa 50616
1.800.833.6417